Location -> Products -> Analyzer Instrument -> On-line Instrument -> Industry Chlorine Meter
Type：CX-RCA-1503 residual chlorine analyzer
Illustrate：It is widely used in such industries as water supply, drinking water, water purification, industrial pure water, swimming pool disinfection, etc. and mainly used for measurement of chlorination, total chlorine and CO2 and control of chlorination.
CX-RCA-1503 Residual Chlorine Analyzer
Main features1.The built-in protective software in the instrument provides various diagnoses.
2.The watchdog design effectively enhances its interference community.
3.The long-life touch screen is easy to use.
4.Manual contact control.
5.Constant-current groove based installation.
6.Simple calibration, i.e. single-point calibration in medium of certain concentration.
7.Dechlorination, total chlorine and CO2 measurements are integrated in a single transmitter.
Main features
1.The built-in protective software in the instrument provides various diagnoses.
2.The watchdog design effectively enhances its interference community.
3.The long-life touch screen is easy to use.
4.Manual contact control.
5.Constant-current groove based installation.
6.Simple calibration, i.e. single-point calibration in medium of certain concentration.
7.Dechlorination, total chlorine and CO2 measurements are integrated in a single transmitter.
Main parameters
| Measuring range | Optionally 0-2-ppm or 0-20 |
| Accuracy | 0.01ppm |
| Operating temp | -40-70C |
| Display mode | Touch screen LCD |
| Signal output | 0/4mA max. load 1k, RS232 |
| Control action | Three-way relay ON/OFF |
| Set point | 2 points |
| Control capacity | 250VAC/7A |
| Net weight | 0.5 Kg |
| Opening dimension | 92x92x110mm |
Last：Without the Next：CX-CL80A/CL80B chlorine control..
